Descrizione del prodotto:

Pattex Power Epoxy Saldatutto in tubetti garantisce la super-potenza incollante di cui hai bisogno per qualsiasi materiale. Il prodotto non solo diventa trasparente quando si asciuga, ma non si espande né si ritira nel processo di indurimento. È  resistente all’acqua, all’olio e ai solventi comuni e può essere usato sia in interni che in esterni.

Pattex Power Epoxy Saldatutto in tubetti funziona in 5 minuti per un incollaggio forte e veloce.

Product Features

Application areas:

  • Wood
  • Cork
  • Ceramique
  • Wood
  • Metal
  • Marble
  • Plastic (except PP, PE and Teflon®)
  • Concrete
  • Glass
  • Stone
  • Fiberglass

Tips and tricks:

Clean before hard

Even if you work with the utmost precision, some Pattex Epoxy can still go where you don’t want it to go. In this case use ethanol, or any other universal solvent, to clean any adhesive remains before they get hard.

Once hardened

Even if you know what you’re doing, mistakes can sometimes happen. And you most realize what went wrong when everything’s done. Once hard, Pattex Epoxy glues can only be removed mechanically. The best thing to do is use a scraper. But be sure to consult the instructions, so you know exactly what you’re doing.

Read the instructions

Before gluing anything together, take a moment to read the instructions included with the product. We really recommend you to consult and follow the technical, safety and environmental information before use.


  • 2x11ml


Product should be stored at a temperature between 10 ºC and 30 ºC.

Passo per passo / come si fa

1.   Assicurarsi che le superfici siano pulite, asciutte, e senza residui di polvere e grasso. Se possibile, carteggiare un po’ per ottenere una presa migliore.

2. Mix components at a ratio of 1:1. Squeeze equal amounts of component A and B out of the tubes and mix together until you only have one colour of adhesive.

3. Apply the double-component mixture to one of the surfaces and join to the other surface.

4. At room temperature, you have 3 minutes after mixing the components to join the surfaces.

5. After 5 minutes, the bond is strong enough to allow for normal use again. You can exert stress after 2 hours, and objects are fully cured after 24 hours.